Opening the case

Opening the case of the Sega Flashback HD device is very easy. You just need a small cross-headed (Philips) screwdriver, thats it.

On the backside, remove 7 screws. The one in the middle is hidden under the label.

Now open the case. Be careful to not damage the cables to the power switch and the LED on the upper case.

On the PCB theres a mini USB port. When you hook up the device to a PC, the Flashback HD will be recognized as a MTP device.

If you have troubles to connect a mini USB cabel to the board, you can remove 4 screws to be able to lift out the PCB.

You could leave a comment if you were logged in.